Si-Jet Venturi GM2 Pump

Our light weight pump unit weighing only 30kg will pass through a 12” diameter manhole enabling easy access in confined space locations.The 4” discharge hose attached allows materials to be transported over considerable distances either vertically or horizontally.

The design innovations enable to the pump to be utilised in several modes. 

A hopper is provided for dry feeding or shovel loading while, by fitting a vacuum unit, materials can be sucked up using a vacuum hose.  Alternatively, the pump may be used to suck out liquids from pits or wells with the assurance of knowing no damage will result should the pump run dry.

Ideal in the marine environments, due to its immediate availability.

Excellent for use where predominantly vertical lifts are involved and for manual loading procedures. 

  • Motive power can be almost any pressurised fluid, such as water, crude oil, refined oils and certain chemicals.
  • Operates on the normal pressures of a ships fire line, tank cleaning or cargo lines.
  • Capacities in excess of 40 tons per hour when used as a submersible pump / 4-6 tons per hour should be estimated when shovelling material into the hopper.
  • Handles solids of up to 1 ½” in diameter.
  • Self priming pump.
  • Can operate dry indefinitely.
  • Simple to operate – no moving parts.
  • Lightweight – basic pump weighs only 30kg.
  • Passes through a standard butterworth opening enabling access to all parts of a vessel.
  • Supply and discharge hoses can be connected to one end of the pump to improve manoeuvrability.
  • Also operates on compressed air.
  • Corrosion resistant – stainless steel parts
  • Parts interchangeable.